parts

[401cj]

yj tub come n get
cj-5 tub n frame w/ title $100
seat brackets for cj $100
yj frame w/ shackle reversal $150
9" complete $150
dana 44 front $150
narrow trac dana 30 set up for yj springs w/ extra shafts $100

[YJeXtreme]

Dave, mind sending pics of Tub and YJ Frame, also do you have title for either/or? Thanks

[401cj]

i'll send you pics tonight the only thing i have title for is the cj-5

[YJeXtreme]

mind sending pics of the 5 too? lil bro is looking for a jeep to build

[1984jeep4x4]

do you still have the dana 44 and what does the 9' have in it?

[401cj]

yeah got them both 9 either has 3.73 or 4,10 open 27 spline 2 sets of shafts plus a set of 31 spline, i was going to put locker in and change to 31 spline

[1984jeep4x4]

ok most likely i am getting th Dana 44 and it bolts on a cj7 right?

[401cj]

no it is full width only axle that is a direct bolt in is the dana 30, i was going to run full width with the 9" and the 44

[1984jeep4x4]

But i can make it fit the rear or the front with some mods that wont be hard will it?

[95greenrio]

You would have to cut the tubes down and have the knuckles re-welded, and then get custom shafts or have the tubes cut down to TJ width or something.

[YJeXtreme]

Sorry for thread hijack But likely, this is Ford D44, being driver-side drop, Great for YJ/TJ, etc.. but not CJ's where T-case output is on passenger side. Also alot less expensive to go full width, won't have to deal w/ ordering custom axles all the time, esp if one breaks....

Got more specs on the D44 Dave? Vehicle type/year? Thanks!

[401cj]

dodge 78ish it was for my cj so it will work on a cj, passenger drop

[hadfield4wd]

You would have to cut the tubes down and have the knuckles re-welded, and then get custom shafts or have the tubes cut down to TJ width or something.

You don't have to do any of this to make it work. It will just be wider. Get wms dimensions to find out how wide. Get the matching rear. It'll be cheaper than cutting down the tubes like described above and the custom shafts and custom hubs for the bolt pattern.

[401cj]

poison spyder offers a kit to run full width axles, the problem you run into is the leaf springs land on top of the pumpkin. the kit relocates the spring hangers to the outside of the frame, spyder website is down but bluetorch fab has one also here is the link

http://bluetorchfab.com/store/product_info.php?cPath=26&products_id=101

[79CJ5]

Poison Spyder is no longer in business. I think he is only making wheels now. Bluetorch has been down all weekend.

[401cj]

yj tub gone
yj frame gone
dana 30 front end gone