Dribrus's 4 runner

[evolution]

Well, i go ahead and start the post for ken...

Heres what we have at this point...

ken was up on potts mountain and the truck pretty much came apart, the lift blocks busted, u-bolts bent, and the axle was under the gas tank on the pass. side.. he had to leave the truck on the mountain that night..

well, myself and jamie was able to get it fixed enough to get it off the mountain the next day..

ken and i talked, and this is what we decided to do to the runner at this point..

solid axle swap on the front with 4" all pro springs, with the added full high steer kit from all pro too.. the rear im not totally for sure what we are goin to do on it but it will be right..
i believe im taking the 3" body out and cutting them down to a 1" lift..
goin to swap out the old rotors and brakes with the ifs brakes..
the rear i beleive we are goin to put in a locker but havent made it to tht stage yet..
heres some pics of the stuff i have so far..

for some reason i can upload the pics.. will try later..

[evolution]

heres the some pics of the new stuff..

[rubican!]

wow you guys are awesome. That yota will for sure be better off then it was.

[Scrambled]

(In Yoda voice) Gears,lockers, longfields ,and twin T-cases in his future I see yes.

Congrats Ken your rig is in good hands. Not only is Chris a good guy but a hell of a fabricator as well.

Later
Sean

[evolution]

well, got to start on ken 4 runner today, this winter has been bad on me in the garage..

got it in there and the whole front end is gutted out..
got a lot of grinding to do now.. will get some pics up later..

goin to do some boat sides and rear locker in it too...

[dribnus]

well, got to start on ken 4 runner today, this winter has been bad on me in the garage..

got it in there and the whole front end is gutted out..
got a lot of grinding to do now.. will get some pics up later..

goin to do some boat sides and rear locker in it too...

Pictures of build process.

[evolution]

did some more triming after the pics, hopfully i will have the springs hanging by the end of the week..

[cootees]

nice. One thing I should suggest is to go ahead and gusset the front axle. Thorw in an e-locker while you are at it.

[evolution]

yeah im planning on the gusset... changing the front disc out for the ifs vented disc and brakes also...

[evolution]

well, got all the frame rails cleaned up and was able to get everything made today to start hanging some springs.. now just havet to find a buddy to help me get the axle from behind the building...lol..we get that out tomorrow...